Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Ask an Expert
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827
Ask an Expert
Explosion Protection

Isolating Amplifier S1SD-1AI-1U.2

S1SD-1AI-1U.2
  • 1-channel signal conditioner
  • 24 V DC supply
  • Input bipolar current and voltage sources
  • Output bipolar current and voltage sources
  • Accuracy 0.1 %
  • Configurable via DIP switches and potentiometer
  • Connection via screw terminals
 Please contact the Serviceline for exact delivery estimation
285.00 USD
Netlist price. Your individual price will be calculated during checkout.
Unit Price 

Quantity

Free Shipping

Purchase on Account

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Datasheet excerpt: Technical data of  S1SD-1AI-1U.2

General specifications
Signal typeAnalog input
Operation timeMTBF: 490 a acc. to SN 29500
stationary continuous operating, average ambient temperature 40 °C (104 °F)
Supply
ConnectionPower Bus or terminals 1-, 2+
Rated voltage16.8 ... 31.2 V DC
Power dissipation0.6 W
Power consumption0.8 W
Input
Connection sidefield side
Transmission rangelinearity range:
unipolar -1 ... 110 %
bipolar -110 ... 110 %
Input I
Connectionterminals 5+, 6-
Input signal0/4 ... 20 mA , 0/2 ... 10 mA , ± 10 mA, ± 20 mA , max. 50 mA
Input resistance≤ 25 Ω
Input II
Connectionterminals 7+, 8-
Input signal0/1 ... 5 V , 0/2 ... 10 V , ± 5 V , ± 10 V , max. 30 V
Input resistance> 1 MΩ
Output
Connection sidecontrol side
Connectionterminals 3-, 4+
Analog voltage output0/1 ... 5 V , 0/2 ... 10 V , ± 5 V, ± 10 V , load ≥ 2 kΩ
Analog current output0/4 ... 20 mA, ± 10 mA, ± 20 mA, load ≤ 600 Ω
Ripple≤ 10 mV eff
Transfer characteristics
Accuracymax. 0.1 % of full-scale value
Influence of ambient temperature< 100 ppm/K of full-scale value
Frequency range0 ... 100 Hz , 0 ... 8 kHz
Settling time7 ms , 100 µs
Galvanic isolation
Output/power supplysafe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min
Input/Other circuitssafe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min
Indicators/settings
Control elementsDIP switch
potentiometer
Configurationvia DIP switches
via potentiometer
Labelingspace for labeling at the front
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Conformity
Degree of protectionIEC 60529:2001
Protection against electrical shockEN 61010-1:2010
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Damaging gasdesigned for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Degree of protectionIP20
Connectionscrew terminals
Core cross section0.5 ... 2.5 mm2 (20 ... 14 AWG)
Massapprox. 70 g
Dimensions6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1
Height97 mm
Width6.2 mm
Depth107 mm
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
CertificateDEMKO 16 ATEX 1750X
MarkingEx-Hexagon II 3G Ex nA IIC T4 Gc
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-15:2010
International approvals
UL approvalE106378
IECEx approval
IECEx certificateIECEx UL 16.0116X
IECEx markingEx nA IIC T4 Gc
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027210129
ECLASS 12.027210129
ECLASS 11.027210129
ECLASS 10.0.127210129
ECLASS 9.027210129
ECLASS 8.027210190
ECLASS 5.127210107
ETIM 9.0EC002919
ETIM 8.0EC002919
ETIM 7.0EC002919
ETIM 6.0EC002919
ETIM 5.0EC001485
UNSPSC 12.132101514

Details: S1SD-1AI-1U.2

This signal conditioner provides the galvanic isolation between field circuits and control circuits.

The device has an input for bipolar current and voltage sources.

At the output the signals are available as bipolar current and voltage sources.

The device is easily configured by the use of DIP switches and potentiometers.

The device can be powered via terminals or Power Bus.

Datasheet: S1SD-1AI-1U.2

DatasheetFile TypeFile Size
Datasheet S1SD-1AI-1U.2PDF811 KB
Fiche de données S1SD-1AI-1U.2PDF875 KB
Datenblatt S1SD-1AI-1U.2PDF812 KB
Datasheet S1SD-1AI-1U.2PDF834 KB
Hoja de datos S1SD-1AI-1U.2PDF830 KB

Documents: S1SD-1AI-1U.2

BrochuresFile TypeFile Size
Product Overview SC-SystemPDF456 KB
Productübersicht SC-SystemPDF488 KB
Instruction manuals
Návod k poużitíPDF132 KB
Instruktions manualPDF0 KB
Instruction manualPDF136 KB
KasutusjuhendPDF127 KB
KäyttöohjePDF127 KB
Manuel d'instructionsPDF138 KB
BetriebsanleitungPDF137 KB
Οδηγίες χρήσηςPDF141 KB
HandleidingPDF0 KB
Instruction manual / BetriebsanleitungPDF130 KB
Manuale di istruzioniPDF135 KB
Lietošanas pamācībaPDF131 KB
Instrukciju vadovasPDF0 KB
Instrukcja obsługiPDF134 KB
Manual de instruçõesPDF132 KB
Manual de utilizarePDF0 KB
Návod na poużitiePDF131 KB
Navodila za uporaboPDF130 KB
Manual de instruccionesPDF137 KB
ManualPDF129 KB
Tender Texts
Tender textD816 KB
AusschreibungstextD816 KB
Application reports
Application Report - Sand Trap and Preliminary Sedimentation StagePDF448 KB
Applikationsbericht - Sandfang und VorklärungPDF434 KB
Documents
System ManualPDF2706 KB
SystemhandbuchPDF2715 KB

Approvals+Certificates: S1SD-1AI-1U.2

CertificatesFile TypeFile Size
Canada UL cULLINK---
Europe DEMKO ATEX Category 3 GPDF1876 KB
UL Non-Sparking nA IECEx Certificate of ConformityLINK---
USA ULLINK---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)PDF468 KB

Associated Products: S1SD-1AI-1U.2

Matching System Components
101.00  USD

Contact Us
Interface for Power Bus, Supply current 3 A, LED status indication, Connection via screw terminalspa
59.00  USD

Contact Us
Bus carrier with bus PCB for 35 mm DIN mounting rail, height 7.5 mm, Provides DC supply voltage and the bus connection to all equipped SC-System modules, Standard length 250 mm (9.84 inch), simple to customize to application space, Eliminates daisy-chainspa
65.00  USD

Contact Us
Bus carrier with bus PCB for 35 mm DIN mounting rail, height 15 mm, Provides DC supply voltage and the bus connection to all equipped SC-System modules, Standard length 250 mm (9.84 inch), simple to customize to application space, Eliminates daisy-chainspa
  Contact Us
Cover for DIN mounting rail, Suitable for Power Bus, Standard length 250 mm (9.84 inch), simple to customize to application space, Packaging unit: 5 piecespa
47.00  USD

Contact Us
Fixing of the bus carrier with bus PCB in the DIN mounting rail, Termination of DIN mounting rail, Suitable for Power Bus, Packaging unit: 5 pieces left, 5 pieces rightpa
General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
USA
- responsible for Canada -
sales@us.pepperl-fuchs.com
phone +1 330 425-3555

© 2024 All Rights Reserved.

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.