Inductive sensor NCB2-12GM40-Z0-V1-3G-3D
- 2 mm flush
- ATEX-/IECEx-approvals for zone 2/22 (Ex ec/tc)
Contact Us
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of NCB2-12GM40-Z0-V1-3G-3D
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | Two-wire | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 1.62 mm | |
| Actual operating distance | 1.8 ... 2.2 mm typ. | |
| Reduction factor rAl | 0.28 | |
| Reduction factor rCu | 0.23 | |
| Reduction factor r304 | 0.7 | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Operating voltage | 5 ... 60 V DC | |
| Switching frequency | 0 ... 800 Hz | |
| Hysteresis | 1 ... 10 typ. 5 % | |
| Reverse polarity protection | reverse polarity tolerant | |
| Short-circuit protection | pulsing | |
| Voltage drop | ≤ 5 V | |
| Operating current | 2 ... 100 mA | |
| Lowest operating current | 2 mA | |
| Off-state current | 0 ... 0.5 mA typ. | |
| Switching state indicator | Multihole-LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 2090 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| IECEx approval | ||
| Equipment protection level Gc (ec) | IECEx TUR 21.0017X | |
| Equipment protection level Dc (tc) | IECEx TUR 21.0018X | |
| ATEX approval | ||
| Equipment protection level Gc (ec) | TÜV 20 ATEX 8523 X | |
| Equipment protection level Dc (tc) | TÜV 20 ATEX 8524 X | |
| UL approval | cULus Listed, General Purpose | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | Connector plug M12 x 1 , 4-pin | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Dimensions | ||
| Length | 40 mm | |
| Diameter | 12 mm | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details: NCB2-12GM40-Z0-V1-3G-3D
Datasheet: NCB2-12GM40-Z0-V1-3G-3D
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet NCB2-12GM40-Z0-V1-3G-3D | 803 KB | |
| Datasheet NCB2-12GM40-Z0-V1-3G-3D | 780 KB | |
| Fiche de données NCB2-12GM40-Z0-V1-3G-3D | 798 KB | |
| Datenblatt NCB2-12GM40-Z0-V1-3G-3D | 783 KB | |
| Scheda tecnica NCB2-12GM40-Z0-V1-3G-3D | 799 KB | |
| Datasheet NCB2-12GM40-Z0-V1-3G-3D | 810 KB | |
| Folha de dados NCB2-12GM40-Z0-V1-3G-3D | 800 KB | |
| Hoja de datos NCB2-12GM40-Z0-V1-3G-3D | 799 KB | |
| Datasheet NCB2-12GM40-Z0-V1-3G-3D | 811 KB |
Documents: NCB2-12GM40-Z0-V1-3G-3D
| Instruction manuals | File Type | File Size |
|---|---|---|
| Инструкции | 181 KB | |
| Návod k poużití | 173 KB | |
| Instruktions manual | 173 KB | |
| Instruction manual | 174 KB | |
| Kasutusjuhend | 168 KB | |
| Käyttöohje | 168 KB | |
| Manuel d'instructions | 176 KB | |
| Betriebsanleitung | 175 KB | |
| Οδηγίες χρήσης | 184 KB | |
| Handleiding | 173 KB | |
| Instruction manual / Betriebsanleitung | 172 KB | |
| Használati útmutató | 175 KB | |
| Manuale di istruzioni | 174 KB | |
| Lietošanas pamācība | 173 KB | |
| Instrukciju vadovas | 174 KB | |
| Instrukcja obsługi | 175 KB | |
| Manual de instruções | 176 KB | |
| Manual de utilizare | 176 KB | |
| Návod na poużitie | 174 KB | |
| Navodila za uporabo | 172 KB | |
| Manual de instrucciones | 176 KB | |
| Manual | 171 KB | |
| Technical information | ||
| Installation conditions | 1054 KB | |
| Einbaubedingungen | 1060 KB |
CAD+CAE: NCB2-12GM40-Z0-V1-3G-3D
| CAD | File Type | File Size |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 57 KB |
| CAD Portal / CAD Portal | LINK | --- |
| EPLAN | ||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | LINK | --- |
| EPLAN macro EDZ / EPLAN Makro EDZ | EDZ | 65 KB |
Approvals+Certificates: NCB2-12GM40-Z0-V1-3G-3D
Associated Products: NCB2-12GM40-Z0-V1-3G-3D
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.
Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
USA
- responsible for Canada -
sales@us.pepperl-fuchs.com
+1 330 425-3555
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.